- 30000 USD ($)
- 30000.00 - 80000.00 USD ($)
- Preparation Machinery
- Stainless Steel
- 380 Volt (v)
- Rust resistant body
- Energy efficient
- Generate less noise
- High performance
Items / Model
380V four wire three phase 10kw
Main Machine Size
1520mm x 960mm x 2080mm
- Pharmacy: granules using for tablet, capsule filling etc.
- Food industry: granules using at food, condiment etc.
- Chemical industry and others: catalyst, pigment etc.
- mix scraper
- screw mixer 4 support frame
- piece of granule
- first granulator
- second granulator
- big granule
- fine granule
- Adopting Touch screen,PLC,VVVF and MSMMI system that make machine can optionally adjust speed in rated range and operation convenient and stable.
- Advanced fault detection device: when working hydraulic system is abnormal or devices (main machine etc.) overload, it will alarm.
- Specific stainless steel auger screw and PA66 auger screw feeding system ensure the materials feeding effective and efficient.
- The surface of stainless steel pinch roller is treated by nit riding technology, has stronger abrasive resistance, fatigue resistance and corrosion resistance.
- The water circulation cooling of rollers can adopt water cooling or cold water compulsively cooling, avoid materials adhesion problem.
- Using advanced import hydraulic system that easy to operate, stable, and have high automat city.
- Do not need any water or ethanol to be humectants, do not need re-dry, the dry compressing granulation have less working procedure and production cost but high efficiency.
- The final products (granules) are uniform, high density, high flow and easy to control the parameters.
- Sealed operation: no pollution, measure up pharmaceutical hygienic standard, particularly, this type granulator is suitable for those materials that will be easy decomposition or agglomeration when exposed to moisture and heat.
- The device can be equipped with Vibration sifter and vacuum conveyer and circulation chillers.
Screw material feeder:
- The screw material feeder includes feeding port, material feeder, lifting mechanism.
- Feeding port can be connected with vacuum material feeder, the level sensor on the hopper can monitor the material.
- The screw material feeder can pre-press and exhaust the material. The air produced by pressing will be discharged by upper exhausting port.
- The purpose of screw material feeder is to transmit material and pre-press.
- The speed of screw material feeder can be adjusted by the inverter.
- Rotate to enhance the knob, lift the screw material feeder and adjust 90 degree, then roll down to connect
material sucking system.
- The pressing roller system is consists of double horizontal pressing rollers and the left one can slide horizontally.
- The material is pressed into pieces by pressing roller system, then the pieces will be conveyed to another granulation structure.
- The material feeding to pressing rollers is actually effected by the surface of pressing roller. The shaft can eliminate the hard agglomeration.
- The pressing roller is driven by geared motor and the speed can be adjusted by the inverter.
- Hydraulic system can keep the pressing pressure advanced set to ensure pressing continuously and consistently.
- There will be sealed protecting cover outside of pressing roller system to secure the operator. While there will be transparent organic glass plate for observation.
Pressing roller cooler:
Water cooled system:connect cold water resource or buy circulating chiller. (Circulating chiller should be installed at auxiliary room)
Remarks: compressed air should be clean and dry; the conveying capacity of QVC-1 is in the scope of 3 m;different materials, different conveying capacities.
- Shanghai, China
- Paypal, Western Union, Telegraphic Transfer (T/T), Letter of Credit (L/C), Delivery Point (DP)
- 200 sets Per Year
- CE, GMP, ISO
2TH XINGLONG ROAD, RUIAN CITY, Wenzhou, Zhejiang, 325200, China